Wisper 905 Torque step over
The latest addition to the Wisper range the 905 Torque needs to be tried before you buy anything else. Astonishing value for money for the high specifications. A real Bosch or mid motor alternative developed in the UK.
Wisper Torque bikes benefit from a new, powerful, almost silent motor controlled by the latest and most innovative torque/speed sensor on the market. The new system will give you instant access to masses of hill climbing power from the moment you start to ride. Simply push down on the pedal and the bike will reward you with a silent surge of power, the harder you push down on the pedals the more the motor will assist. When the bike reaches cruising speed, power will gradually ease back and when power is not needed at all, such as when descending hills, it will cut off completely giving you up to 40% extra range when compared to more basic speed sensor bikes. A torque sensor bike gives you instant access to power, a speed/cadence sensor only works after you have turned the pedals about half a rotation. A good torque sensor will provide instant power, longer range and a much more natural riding experience.
Available with either 375wh or 575wh battery.
High efficiency, 250W ultra hi torque brushless rear wheel drive Hybrid Torque drive system designed to deliver maximum power to the rear wheel smoothly, silently and efficiently.
Lithium with advanced battery management system (BMS) Medium range 375Wh 3kg
Long range Samsung 575Wh 4kg
Both batteries use identical battery cases so are interchangeable between 705Torque, 806Classic and 905Torque
Wisper bikes Remote Control Service System (RCSS) on 575Wh only Deep sleep mode. Protects battery during times of non-use on 575Wh only
Polycarbonate/ABS mix, non conductive for extra safety, conforms to 2013 90cm drop test.
Sine wave controller for almost silent running
Lithium 42V output intelligent charger communicates with battery management system (BMS), auto stop when fully charged Standard battery 2A, Charge time 2.5 to 5hours Long range battery 3A, Charge time 2 to 4hours
All electronic components and motor wheel have individual connectors for ease of servicing
375Wh battery Average 50miles/80kilometers Max 70miles/115kilometers
575Wh battery Average 70miles/115kilometers Max100miles/150kilometers
1. Throttle only: to 4mph/6kph 2. Throttle assist: complete throttle use when pedaling forward 3. Pedelec: with 4 levels of assistance power and safe mode 4. Twist throttle to disengage torque sensor for more power on flat. Maximum speed 15.5mph/25kph with powered assistance, this does not affect top speed when pedaling
Back lit LCD display panel with bike and light on/off switch Power assistance: four levels and safe mode Speedo, Range, Trip, Battery state, Clock
21kg without battery Including battery and all accessories 375Wh: 24kg 1575Wh: 25kg Load capacity 135kg/290lb/20st 9lb
Hydro formed, hand welded,6061 Alloy T4 and T6 tempered Frame size 18” 46.5cm
Finish Graphite Silk painted and lacquered, three stage oven hardened
Suntour NEX/SR with lockout adjustable hydraulic suspension forks with hydraulic lock out
Promax 350mm black anodised aluminium
Selle Royal Italy
Promax black anodised alloy with ergo support grips
Promax black anodised alloy quick release adjustable
Black anodised alloy
SHIMANO Acera 8 speed derailleur with 8 speed selector 8 speed Sunrace rear cassette
170mm 52 tooth
Full, alloy Graphite Silk paintwork
KMC Z51RB rust resistant
Anodised Black alloyDrop outs Stainless steel cassette
Sealed bearing with torque sensor
Wellgo city and touring style alloy non-slip, sealed bearings
Tektro hydraulic vented 180mm disc brakes front and 160mm rear
Alloy double walled 26” x 1.5” Spokes 13g black anodised
Kenda 1088 26” 1.75 high puncture resistance with Kevlar and wall reflector
Front: Spannings 36V 15W LED super bright, power from bike e-system
Rear: 36V light, power from bike e-system
Front white, rear red, wheels orange and pedal reflectors
A unique rear battery rack, certified to 25kg developed for the new Wisper 905 and 705 models. Simply bolt into the rear stays to form a solid rattle free mount.
A4 grade stainless steel or alloy